Lexmark MX910 Series, Руководство пользователя

Страница: 183 / 363

Hole Punch
Off
On
Specify whether prints have punched holes.
Notes:
• Off is the factory default setting.
•
This menu item appears only when a supported staple, hole punch finisher is installed.
Hole Punch Mode
2 holes
3 holes
4 holes
Specify the number of holes to be made on the prints.
Notes:
• 3 holes is the U.S. factory default setting. 4 holes is the international factory default
setting.
• This menu item appears only when a supported staple, hole punch finisher is installed.
Duplex Binding
Long edge
Short edge
Define binding for two-sided pages in relation to the page orientation of the printed document.
Notes:
•
Long edge assumes binding along the long edge of the page (left edge for portrait and top
edge for landscape).
•
Short edge assumes binding along the short edge of the page (top edge for portrait and
left edge for landscape).
Paper Saver Orientation
Auto
Landscape
Portrait
Specify the orientation of a multiple
‑
page document.
Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Paper Saver
Off
2
‑
Up
3
‑
Up
4
‑
Up
6
‑
Up
9
‑
Up
12
‑
Up
16
‑
Up
Specify that multiple
‑
page images be printed on one side of a paper.
Notes:
•
Off is the factory default setting.
• The number selected is the number of page images that are printed per side.
Paper Saver Border
None
Solid
Print a border on each page image.
Note: None is the factory default setting.
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specify the positioning of multiple
‑
page images.
Notes:
•
Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they are in portrait or
landscape orientation.
Understanding the printer menus 183