Lexmark MX910 Series, Руководство пользователя

Страница: 284 / 363

Scanner disabled. Contact system administrator if problem persists. [840.02]
Try one or more of the following:
•
Touch Continue with scanner disabled to return to the home screen, and then contact your system support person.
•
Touch Reboot and automatically enable scanner to cancel the job.
Note: This attempts to enable the scanner.
Scanner jam, remove jammed originals from the scanner [2yy.xx]
Remove the jammed paper from the scanner.
Scanner maintenance required, use ADF Kit [80]
The printer is scheduled for maintenance. For more information, go to the Lexmark support Web site at
http://support.lexmark.com or contact your service representative, and then report the message.
Scanner maintenance required soon, use ADF Kit [80]
Contact customer support, and then report the message. The printer is scheduled for maintenance.
Serial port [x] disabled [56]
Try one or more of the following:
•
From the printer control panel, touch Continue to clear the message.
The printer discards any data received through the specified serial port.
• Make sure Serial Buffer is not set to Disabled.
•
From the printer control panel, set Serial Buffer to Auto in the Serial [x] menu.
Some held jobs were not restored
From the printer control panel, touch Continue to delete the indicated job.
Note: Held jobs that are not restored remain in the printer hard disk and are inaccessible.
SMTP server not set up. Contact system administrator.
From the printer control panel, touch Continue to clear the message.
Note: If the message appears again, then contact your system support person.
Standard network software error [54]
Try one or more of the following:
•
From the printer control panel, touch Continue to continue printing.
• Turn off the printer, and then turn it back on.
Troubleshooting 284