When printing on card stock:
•
Make sure the Paper Type is Card Stock.
•
Select the appropriate Paper Texture setting.
•
Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or
other paper handling problems.
•
Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 210°C (410°F)
without releasing hazardous emissions.
•
Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting
introduces semi-liquid and volatile components into the printer.
•
Use grain short card stock when possible.
Printing information pages
For more information on printing information pages, see “Printing a menu settings page” on page 23 and “Printing
a network setup page” on page 23.
Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and
Ready
appears.
2
From the printer control panel, press
.
3
Press the arrow buttons until
Reports
appears, and then press
.
4
Press the arrow buttons until
Print Fonts
appears, and then press
.
5
Press the arrow buttons until
PCL Fonts
or
PostScript Fonts
appears, and then press
.
After the font sample list prints,
Ready
appears.
Printing a directory list
A directory list shows the resources stored in flash memory or on the hard disk.
1
Make sure the printer is on and
Ready
appears.
2
From the printer control panel, press
.
3
Press the arrow buttons until
Reports
appears, and then press
.
4
Press the arrow buttons until
Print Directory
appears, and then press
.
After the directory list prints,
Ready
appears.
Printing the print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down
and
while turning the printer on.
Printing
53
