4
Press the arrow buttons until
Eco-Mode
appears, and then press
.
5
Select the setting you want, and then press
.
Submitting changes
appears.
Reducing printer noise
Use Quiet Mode to reduce the printer noise.
Note:
See the table for the multiple settings that change when you select a Quiet Mode setting.
Choose
To
On
Reduce printer noise.
•
You may notice a reduction in processing speed.
•
Printer engine motors do not start until a job is ready to
print. You may notice a short delay before the first page
is printed.
•
Fans run at a reduced speed or are turned off.
•
If your printer has faxing capability, fax sounds are
reduced or disabled, including those made by the fax
speaker and ringer.
Off
Use factory default settings. This setting supports the
performance specifications for your printer.
To select a Quiet Mode setting:
1
From the printer control panel, press
.
2
Press the arrow buttons until
Settings
appears, and then press
.
3
Press the arrow buttons until
General Settings
appears, and then press
.
4
Press the arrow buttons until
Quiet Mode
appears, and then press
.
5
Select the setting you want, and then press
.
Submitting changes
appears.
Adjusting Power Saver
To save energy, you can decrease the number of minutes the printer waits before it enters Power Saver mode.
Available settings range from 1–240 minutes. The factory default setting is 30 minutes.
Using the Embedded Web Server
1
Type the printer IP address into the address field of your Web browser.
Note:
If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click
Settings
, and then click
General Settings
.
3
Click
Timeouts
.
Minimizing your printer's environmental impact
28
