23
ENGLISH
Auto : Automatically turn, on/off
Flash is on
Flash is off
5. Press the Left/Selt-timer button (16) to exit the submenu. Press the Menu button (15) to
close the menu and go back to capture mode.
6. The continuous shooting icon
is displayed on the left corner of the LCD screen.
Press the Shutter button (1) to take six pictures continuously.
Zoom
The camera has a digital zoom.
1. To zoom in, press “T”
on the Zoom button (7).
2. To zoom out, press “W”
on the Zoom button (8).
When the zoom button is pressed, the “zoom level” icon is available on the right side of
the LCD screen.
Note:
Digital zoom may affect the quality of image. The higher the digital zoom is, the
lower the image quality is.
Flash function
1. To use the flash in capture mode, repeatedly press the Right/Flash (11) until your
desired setting is shown by the icon on the screen:
2. Press the Shutter button (1) to shoot the required image. The screen is in blank when
recharging.
Notes:
• The flash will not activate during continuous shooting, while recording a video clip or if
the battery is low.
• The screen is blank when the flash is recharging. Wait a few seconds before taking
another picture.
Self-timer
1. Turn the camera on.
2. Press the Menu button (15) to display the “Still” menu.
3. Use the Up/Display (10) and Down/Mode (14) buttons to select the “Capture Mode”
menu and Press OK (12) to access the submenu “Off/2 Seconds/5 Seconds/10
Seconds”.
Turn the camera by pressing the Power button (2). You are already in capture mode
(default mode) when you turn on your camera, the camera icon
appears on the LCD
screen (top left).
Taking a photo (single shooting)
1. Use the LCD screen (17) to frame your subject and hold the camera steady.
2. Use the zoom buttons to adjust the framing.
3. Press the Shutter button (1) to take a photo. The image taken will appear briefly on the
LCD screen.
Notes:
• The number of photos taken will be displayed on the top right part of the LCD screen in
capture mode.
• When the memory (built-in memory or SD card memory) is full, “Card Full” will appear
on the screen. Make sure you transfer your photos to your computer.
• Do not take the memory card or battery out when the camera is saving the image,
otherwise, the image won’t be saved completely.
Taking a photo (continuous shooting)
You can select the continuous shooting option to take 6 pictures continuously.
1. Turn the camera on.
2. Press the Menu button (15) to display the “Still” menu.
3. Use the Up/Display (10) and Down/Mode (14) buttons to select the “Continue Shot”
submenu. Press OK (12) to confirm.
4. Press the Up/Display (10) and Down/Mode (14) buttons to select “On” or “Off” and the
OK button (12) to confirm.
DJ090series1213_23May_V06.indb 23
23/05/2013 1:23 PM
