level 1 H-1200 115V, Руководство оператора

Страница: 61 / 82

a
b
55
S E C T I O N 1 1 • T e s t i n g
3 Gas Vent/Filter Assembly Interlock – Pull the top of the Gas
Vent/Filter Assembly from the Block. The Check Disposables
indicator will illuminate and the audible alarm beeps.
4 #3 Check Tubing Interlock on the Air Detector/Clamp – Remove
the tubing from the Clamp Slot and close the door. The Check
Tubing alarm signal on the Air Detector/Clamp is activated and the
audible alarm beeps.
5
#3 Check Door Closed Interlock on the Air Detector/Clamp – With
tubing installed in the Clamp Slot, open the door. The Check
Tubing alarm signal on the Air Detector/Clamp is activated and the
audible alarm beeps.
Over Temperature Test
Do the following
1 Insure that the Fluid Warmer is at operating temperature
(41°C).
2
Press and hold the Over Temperature Test button ( a ).
3 The Over Temperature LEDs illuminate, and an audible alarm
beeps.
4 Release the Over Temperature Test button.
5
Over Temperature LED and audible alarm signal remains active.
Clear the Alarm mode
1
Turn the Fluid Warmer OFF.
2 Turn the Fluid Warmer back ON.
Fluid Warmer Alarm Signal Test
The Alarm Test button is used to confirm proper operation of the visual
and audible alarm indicators.
Do the following
1
Press and hold the Alarm Test button (
b
).
2 The LED illuminates, and an audible alarm beeps.
3 Release the Alarm Test button.
4 Over Temperature LED remains lit, and the audible alarm
continues to beep.
Clear the Alarm mode
1
Turn the Fluid Warmer OFF.
2
Turn the Fluid Warmer back ON.
| Operator’s Manual