level 1 H-1200 115V, Руководство оператора

Страница: 5 / 82

| Operator’s Manual
9 Operating Instructions
37
Warnings 37
9.1 Set Up for Use 38
A—Install Disposable Administration Set 38
B—Prime the Disposable Administration Set 41
C—Prime the Patient Line 42
D—Test the Audible and Visual Alarms 43
E—Test the Air Detector/Clamp 44
9.2 Use of the Fluid Warmer 46
Step 1—Load the Pressure Chambers 46
Step 2—Pressurize the Pressure Chambers 47
Step 3—Make Patient Connection 48
Step 4—Replace the Gas Vent/Filter Assembly 48
Step 5—Change the Fluid Bag 48
9.3 Replace the Gas Vent/Filter Assembly 48
9.4 Activated Alarms 49
9.5 After Use 51
10 Troubleshooting
52
General Troubleshooting Guide 52
Slow Flow Rate Troubleshooting Guide 53
11 Testing
54
Add Recirculating Solution Alarm 54
Check Disposables Alarm 54
Over Temperature Test 55
Fluid Warmer Alarm Signal Test 55
Performance Testing 56
Cold Start Test 56
Calibration Test 56
Alternative Calibration Test 56
Calibration Test with DSTA-40 56
Proper Calibration of Recirculating Solution Temperature 57
Periodic Electrical Testing 58
Earth Leakage 58
Ground Continuity 58
12 Maintenance
59
Maintenance Performed Prior to Every Use 59
Clean the Exterior 59
General Inspection 60
Maintenance Performed Every 30 Days 61
Lubricate O-Ring Seals 61
Change Recirculating Solution with Distilled Water 61
Maintenance Performed Every 12 Months 61
Disinfect the Reservoir 61
Change Recirculating Solution with 0.3% Hydrogen
Peroxide/Distilled Water Solution
62
Change O-Rings 62
Clean Fan Filter 62
Inspect Air Detector/Clamp 63
Testing Fluid Warmer Operation 63
Maintenance and Calibration Log 64
Scheduled Maintenance and Calibration Checklist 64
C o n t e n t s
v