Lenovo ThinkSystem ST650 V2 Скачать руководство пользователя страница 28

Страница: 28 / 210

Table 2. Events organized by severity (continued)

Event ID

Message String

Severity

FQXSPSE4006I

SSL data in the Management Controller [arg1] configuration data is
invalid. Clearing configuration data region and disabling SSL.

Error

FQXSPSR0001N

Sensor [SensorElementName] has transitioned to non-recoverable
from a less severe state.

Error

FQXSPUN0019M

Sensor [SensorElementName] has transitioned to critical from a less
severe state.

Error

FQXSPUN0023N

Sensor [SensorElementName] has transitioned to non-recoverable.

Error

FQXSPUP0007L

Invalid or Unsupported firmware or software was detected on system
[ComputerSystemElementName].

Error

FQXSPUP4000I

Please ensure that the Management Controller [arg1] is flashed with
the correct firmware. The Management Controller is unable to match
its firmware to the server.

Error

FQXSPUP4003I

[arg1] firmware mismatch internal to system [arg2]. Please attempt to
flash the [arg3] firmware.

Error

FQXSPUP4004I

XCC firmware mismatch between nodes/servers [arg1] and [arg2].
Please attempt to flash the XCC firmware to the same level on all
nodes/servers.

Error

FQXSPUP4005I

FPGA firmware mismatch between nodes/servers [arg1] and [arg2].
Please attempt to flash the FPGA firmware to the same level on all
nodes/servers.

Error

List of XClarity Controller events

This section lists all messages that can be sent from the XClarity Controller.

•

FQXSPBR4000I: Management Controller [arg1]: Configuration restored from a file by user [arg2].

This message is for the use case where a user restores a Management Controller configuration from a file.

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0027

User Action:

Information only; no action is required.

•

FQXSPBR4001I: Running the backup Management Controller [arg1] main application.

This message is for the use case where a Management Controller has resorted to running the backup
main application.

Severity: Warning
Serviceable: No
Automatically notify Support: No
Alert Category: System - other
SNMP Trap ID: 22
CIM Prefix: IMM CIM ID: 0030

ThinkSystem ST650 V2 Messages and Codes Reference

Содержание ThinkSystem ST650 V2



















































































































































































































Результаты поиска

Содержание ThinkSystem ST650 V2

Отзывы:

Бренды по названию

Популярные бренды

Lenovo ThinkSystem ST650 V2, Справочник

Результаты поиска

Содержание ThinkSystem ST650 V2

Отзывы:

Бренды по названию

Популярные бренды