Lenovo ThinkServer RD350, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 95 / 176

6. Remove the Super Capacitor Module from the holder.
Figure 41. Removing the Super Capacitor Module from the holder
7. If you are instructed to return the old ThinkServer RAID Super Capacitor Module, follow all packaging
instructions and use any packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 131.
Installing or removing a PCIe card
This topic provides instructions on how to install or remove a PCIe card, such as an Ethernet card, a RAID
card, or any other supported PCIe cards.
Note: The PCIe card is extremely sensitive to ESD. Ensure that you read and understand “Handling
static-sensitive devices” on page 54 first and carefully perform the operation.
Installing a PCIe card
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 53.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
To install a PCIe card on the riser card assembly, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
2. Prepare your server. See “Removing or extending the server from the rack cabinet” on page 55.
3. Remove the server cover. See “Removing the server cover” on page 55.
4. Remove the riser card assembly on which you want to install the PCIe card. See “Replacing the riser
card assembly” on page 122.
Chapter 6
.
Replacing hardware
81