Lenovo ThinkServer RD350, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 136 / 176

8. Carefully position the new front panel board so that the two screw holes in the new front panel board
are aligned with the corresponding mounting studs on the chassis. Then, install the screws to secure
the front panel board in place.
Figure 96. Installing the front panel board
9. Connect the front-panel-board cables to the system board. See “System board components” on
page 31.
10. If you are instructed to return the old front panel board, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to “Completing the parts replacement” on page 131.
Replacing the riser card assembly
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 53.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Use any documentation that comes with the new riser card assembly and follow those instructions in
addition to the instructions in this topic.
To replace the riser card assembly, do the following:
1. Remove all external media from the drives and turn off all attached devices and the server. Then,
disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the server.
122
ThinkServer RD350 User Guide and Hardware Maintenance Manual