Lenovo ThinkServer RD350, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 31 / 176

Front view of the server
The front view of the server varies by model. The illustrations in this topic show the server front views
based on the supported internal drives:
• “Front view of server models with 3.5-inch drives” on page 17
• “Front view of server models with 2.5-inch drives” on page 18
Note: Depending on the model, your server might look slightly different from the illustrations in this topic.
Front view of server models with 3.5-inch drives
Figure 3. Front view of server models with 3.5-inch drives
1
Front panel
2
Slim optical drive (available on some models)
3
Pull-out information card
4
Rack handle (right)
5
3.5-inch-drive bays (0-3)
6
Rack handle (left)
1 Front panel
For detailed information about the controls, connectors, and status LEDs on the front panel, see “Front
panel” on page 19.
2 Slim optical drive
Some server models come with a slim SATA optical drive.
3
Pull-out information card
The machine type, model, and serial number label of the server is attached on the pull-out information card.
See “Machine type, model, and serial number label” on page 15.
4 Rack handle (right)
6 Rack handle (left)
If your server is installed in a rack cabinet, you can use the rack handles to help you slide the server out of
the rack cabinet. You also can use the rack handles and screws to secure the server in the rack cabinet so
that the server cannot slide out, especially in vibration-prone areas. For more information, refer to the
Rack
Installation Instructions that comes with your server.
5
3.5-inch-drive bays (0-3)
The EMI integrity and cooling of the server are protected by having all drive bays covered or occupied.
The number of the installed hard disk drives in your server varies by model. The vacant hard-disk-drive
bays are occupied by dummy hard-disk-drive trays.
When you install drives, follow the order of the drive bay numbers.
Chapter 3
.
Product overview
17