Lenovo ThinkServer RD350, Руководство пользователя и руководство по техническому обслуживанию аппаратного обеспечения

Страница: 73 / 176

4. Insert a finger into each of the two holes 1 in the cooling shroud and then lift the cooling shroud
out of the server.
Attention: For proper cooling and airflow, reinstall the cooling shroud before turning on the server.
Operating the server for more than 30 minutes with the cooling shroud removed might damage server
components.
Figure 22. Removing the cooling shroud
Reinstalling the cooling shroud
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 53.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Depending on the model, your server might look slightly different from the illustrations in this topic.
To reinstall the cooling shroud, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are
left inside your server.
2. Ensure that all internal cables are routed correctly and secured by any cable clips or ties in the server.
Keep cables clear of the hinges and sides of the server chassis to avoid interference with reinstalling the
cooling shroud.
Chapter 6
.
Replacing hardware
59