Lenovo RackSwitch G8264, Справочник по командам

Страница: 600 / 794

600
G8264 Command Reference for ENOS 8.4
Option 82 Configuration
These commands allow you to configure DHCP option 82 information. The switch
can use the following DHCP option 82 sub ‐ options to allocate server addresses.
 Circuit ID: Identifies the host name or MAC addresses of the switch making the
DHCP request.
 Remote ID: Identifies the port that receives the DHCP request.
DHCP Relay Agent (Option 82) is defined in RFC 3046.
no ip bootp ­ relay bcast ­ domain
<1 ‐ 10>
Deletes the selected broadcast domain configuration.
Command mode: Global configuration
show ip bootp ­ relay
Displays the current parameters for the BOOTP Relay broadcast domain.
Command mode: All
Table 329.
BOOTP Relay Broadcast Domain Configuration Options (continued)
Command Syntax and Usage
Table 330.
Option 82 Configuration Options
Command Syntax and Usage
[no] ip bootp ­ relay information enable
Enables or disables BOOTP Option 82.
Command mode: Global configuration
ip bootp ­ relay information policy {keep|drop|replace}
Configures the DHCP re ‐ forwarding policy, as follows:

keep
: Retains requests that contain relay information if the option 82
information is also present.

drop
: Discards requests that contain relay information if the option 82
information is also present.

replace
: Replaces the relay information in requests that also contain
option 82 information.
Command mode: Global configuration
no ip bootp ­ relay information policy
Removes the DHCP re ‐ forwarding policy.
Command mode: Global configuration
show ip bootp ­ relay
Displays the current BOOTP Option 82 parameters.
Command mode: All