Lenovo RackSwitch G8264, Справочник по командам

Страница: 173 / 794

© Copyright Lenovo 2017 Chapter 2: Information Commands
173
VM Information
The following command displays VM information:
show virt vm
Command mode: All
VM information includes the following for each Virtual Machine (VM):

State of the Virtual Machine (
~
indicates the VM is inactive/idle)

IP address

MAC address

Index number assigned to the VM

Server port on which the VM was detected

VM group that contains the VM, if applicable

VM Check status for the corresponding VM
VM Check Information
The following command displays VM Check information:
show virt vmcheck
Command mode: All
IP Address VMAC Address Index Port VM Group(Profile) Check Status
­­­­­­­­­­­­­ ­­­­­­­­­­­­­­­­­ ­­­­­ ­­­­ ­­­­­­­­­­­­­­­­­ ­­­­­­­­­­­­
*127.31.46.50 00:50:56:4e:62:f5 4 3
*127.31.46.10 00:50:56:4f:f2:85 2 4
+127.31.46.51 00:50:56:72:ec:86 1 3
+127.31.46.11 00:50:56:7c:1c:ca 3 4
127.31.46.25 00:50:56:9c:00:c8 5 4
127.31.46.15 00:50:56:9c:21:2f 0 4
127.31.46.35 00:50:56:9c:29:29 6 3
Number of entries: 7
* indicates VMware ESX Service Console Interface
+ indicates VMware ESX/ESXi VMKernel or Management Interface
Action to take for spoofed VMs:
Basic: Oper disable the link
Advanced: Install ACL to drop traffic
Maximum number of acls that can be used for mac spoofing: 50
Trusted ports by configuration: empty