Lenovo RackSwitch G8264, Справочник по командам

Страница: 28 / 794

28
G8264 Command Reference for ENOS 8.4
telnet
This command is used to form a Telnet session
between the switch and another network device. The
format is as follows:
telnet [{
<hostname>
|
<IP address>
}
[
<service port (1 ‐ 65535)>
]
[data ­ port|mgt ­ port]]
Where:

hostname/IP address
: Sets the target
station.

port
: Sets the logical Telnet port or service
number.
By default, the management port is used. To use a
specific port, use the following options:

data port:
data ­ port

management port:
mgt ­ port
Note: The DNS parameters must be configured if
specifying hostnames.
show history
This command displays the last ten issued
commands.
show who
Displays a list of users who are currently logged in.
show line
Displays a list of users who are currently logged in,
in table format.
Table 3.
Description of Global Commands
Command Action