Lenovo RackSwitch G8264, Справочник по командам

Страница: 555 / 794

© Copyright Lenovo 2017 Chapter 4: Configuration Commands
555
ipv6 ospf encryption ipsec spi
<256 ‐ 4294967295>
esp
{3des|aes ­ cbc|null}
<encryption key (hexadecimal)>
{md5|sha1|none}
<authentication key (hexadecimal)>
Configures the Security Parameters Index (SPI), encryption algorithm,
authentication algorithm, and authentication key for the Encapsulating
Security Payload (ESP). The ESP algorithms supported are:

3des
(hexadecimal key length is 48)

aes ­ cbc
(hexadecimal key length is 32)

null
means ESP with no encryption.
The authentication algorithms supported are:

md5
(hexadecimal key length is 32)

sha1
(hexadecimal key length is 40)

none
means ESP with no authentication.
Note: If the encryption algorithm is null, the authentication algorithm must be
either MD5 or SHA1. If an encryption algorithm is specified (3DES or
AES ‐ CBC), the authentication algorithm can be
none
.
Command mode: Interface IP
no ipv6 ospf encryption ipsec spi
<256 ‐ 4294967295>
Disables the specified Encapsulating Security Payload (ESP) SPI.
Command mode: Interface IP
ipv6 ospf encryption ipsec default
Resets the Encapsulating Security Payload (ESP) configuration to default
values.
Command mode: Interface IP
Table 293.
Layer 3 IPsec Configuration Options (continued)
Command Syntax and Usage