Lenovo RackSwitch G8264, Справочник по командам

Страница: 109 / 794

© Copyright Lenovo 2017 Chapter 2: Information Commands
109
show ipv6 ospf interface [
<interface number>
]
Displays interface information for a particular interface. If no parameter is
supplied, it displays information for all the interfaces. To view a sample
display, see page 110 .
Command mode: All
show ipv6 ospf neighbor [
<nbr router ‐ ID (IP address)>
]
Displays the status of a neighbor with a particular router ID. If no router ID is
supplied, it displays the information about all the current neighbors.
Command mode: All
show ipv6 ospf redist ­ config
<1 ‐ 128>
Displays the current OSPFv3 redistribution configuration for the specified
entry.
Command mode : All
show ipv6 ospf redist ­ config information
Displays OSPFv3 redistribution information to be applied to routes learned
from the route table.
Command mode: All
show ipv6 ospf request ­ list [
<nbr router ‐ ID (IP address)>
]
Displays the OSPFv3 request list. If no router ID is supplied, it displays the
information about all the current neighbors.
Command mode: All
show ipv6 ospf retrans ­ list [
<nbr router ‐ ID (IP address)>
]
Displays the OSPFv3 retransmission list. If no router ID is supplied, it displays
the information about all the current neighbors.
Command mode: All
show ipv6 ospf routes
Displays OSPFv3 routing table. To view a sample display, see page 112 .
Command mode: All
show ipv6 ospf summary ­ prefix
<1 ‐ 16>
Displays the current OSPFv3 AS ‐ external range.
Command mode : All
show ipv6 ospf summary ­ prefix information
Displays the OSPFv3 external summary ‐ address configuration information.
Command mode: All
Table 48.
OSPFv3 Information Options (continued)
Command Syntax and Usage