Lenovo RackSwitch G8264, Справочник по командам

Страница: 736 / 794

736
G8264 Command Reference for ENOS 8.4
IP Route Manipulation
The following table describes the IP route manipulation commands.
Note: To display all routes, you can also refer to “IP Routing Information” on
page 91 .
Table 413.
IP Route Manipulation Options
Command Syntax and Usage
debug route ­ map pbr
Enables policy ‐ based routing debugging.
Command mode: Privileged EXEC
show ip route
Shows all routes.
Command mode: All
show ip route address
<IP address>
Shows a single route by destination IP address.
Command mode: All
show ip route gateway
<IP address>
Shows routes to a default gateway.
Command mode: All
show ip route interface
<1 ‐ 128>
Shows routes on a single interface.
Command mode: All
show ip route tag {address|bgp|broadcast|fixed|martian|
|multicast|ospf|rip|static}
Shows routes of a single tag. For a description of IP routing tags, see Table 41
on page 92 .
Command mode: All
show ip route type {broadcast|direct|indirect|local|
|martian|multicast}
Shows routes of a single type. For a description of IP routing types, see
Table 40 on page 92 .
Command mode: All
clear ip route
Clears the route table from switch memory.
Command mode: Privileged EXEC