Lenovo RackSwitch G8264, Справочник по командам

Страница: 682 / 794

682
G8264 Command Reference for ENOS 8.4
event counter memory ge
<1 ‐ 50>
Triggers a script execution when memory usage percentage exceeds an user
defined threshold. Memory usage percentage is checked every
60
seconds.
Command mode : Scheduler Job
event syslog
<event type>
Configures the syslog event which triggers the scheduled job. The following
syslog event types are allowed:

BGPSESDOWN (BGP neighbor session failed event)

BGPSESUP (BGP neighbor session established event)

DOT1XFAIL (802.1x authentication failure event)

ISLVLGDOWN (vLAG ISL down event)

ISLVLGUP (vLAG ISL up event)

LINKDOWN (port link down event)

LINKUP (port link up event)

LLDPDISCOVER (LLDP neighbor add or delete event)
Note : When a LLDP trap is detected, the scheduler automatically triggers a
job.

LOGINFAIL (switch user login fail event)

LOGINSUCC (switch user login success event)

MBURST (microburst)
Note : All ports microburst state is checked every 10 seconds. When a port goes
into bursting state, the scheduler automatically triggers a job.

MGTGWDOWN (Mgmt gateway unavailable event)

MGTGWUP (Mgmt gateway available event)

MROUTERNEW (new multicast router learned event)

STGTPCH (STG topology change event)

VRRPBKP (VRRP becoming backup event)

VRRPMRS (VRRP becoming master event)
Note: In order to trigger an event, the syslog for each corresponding event
type must be enabled.
Command mode : Scheduler Job
event time absolute
<yyyy> <mm> <dd> <hh
:
mm
:
ss>
[interval
[
<5 ‐ 86400>
|
<hh:mm:ss>
]]
Triggers a script execution at a specific given date. The script runs only once if
no time interval is configured.
Note : If system time zone changes, all absolute timer jobs are automatically
rescheduled.
Command mode : Scheduler Job
Table 385.
Scheduler Jobs Management Configuration Commands
Command Syntax and Usage