Lenovo 7D2F, Руководство по обслуживанию

Страница: 95 / 188

Install the front operator panel
Use this procedure to install the front operator panel.
Before installing the front operator panel:
1. Read the safety information and installation guidelines (see “Safety” on page iii and “Installation
Guidelines” on page 49 ).
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
To install the front operator panel, complete the following steps:
Step 1. Align the panel with the slot on operator panel tray assembly, and slide it in until it clicks into place.
Figure 83. Front operator panel installation
After installing operator panel tray assembly, complete the following steps:
1. Reinstall the operator panel tray assembly (see “Install the operator panel tray assembly” on page 84 ).
PCIe riser-card assembly and adapter replacement
Use this procedure to remove or install the PCIe riser-card assembly and the adapters.
Remove the PCIe riser-card assembly
Use this procedure to remove the PCIe riser-card assembly.
Before removing the PCIe riser-card assembly:
1. Read the safety information and installation guidelines (see “Safety” on page iii and “Installation
Guidelines” on page 49 ).
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables (see
“Power off the server” on page 11 ).
3. If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top
cover, or remove the server from the rack.
4.
Watch the procedure
Chapter 3
.
Hardware replacement procedures
87