Lenovo 7D2F, Руководство по обслуживанию

Страница: 125 / 188

Figure 115. Unlocking the security bezel
Step 2. Press on the release latch and pivot the security bezel outward to remove it from the chassis.
Figure 116. Security bezel removal
Install the security bezel
Install the security bezel by pivoting the security bezel inward until the other side clicks into place, and then
locking the security bezel.
Before installing the security bezel:
1. Read the safety information and installation guidelines (see “Safety” on page iii and “Installation
Guidelines” on page 49 ).
2.
Watch the procedure
A video of this procedure is available at YouTube: https://www.youtube.com/playlist?list=
PLYV5R7hVcs-B2y7oAb54mfyuLrIusa_qE .
3. If you have removed the rack handles, reinstall it (see
ThinkSystem SR850P Rack Installation Guide
).
Step 1. Carefully insert the tabs on the security bezel into the slots on the right rack handle. Then, press
and hold the release latch, and pivot the security bezel inward until the other side clicks into place.
Chapter 3
.
Hardware replacement procedures
117