Leica tps1100, Руководство пользователя, Страница: 13 / 1154

GeoBASIC User Manual 3 — Creating a GeoBASIC Application
TPS1100-Version 2.10 3-7
Entry Point Since every loadable application on the TPS may have
more than one entry point, one has to select a valid
entry point of the application. This value can be
entered before the debug info has been loaded, or after
the debug info load operation. In the latter case choose
the entry point by selecting an item from the drop
down list.
Catch Runtime
Errors Enable this flag to catch runtime errors.
Number of Watch
Variables Select a value between 1 and 1000 watch variables.
The number determines the table size on the server
side. This value heavily influences the performance of
certain debug operations. If you don’t a big number,
then choose a smaller number for better performance.
Size of Shadow
Memory Select a value between 100 and 10000 Bytes. This will
be the size of the shadow memory, where the server
will keep a backup copy of the registered variables.
3.1.4 The Interpreter and the Firmware
Both have been adapted to provide all the additional functionality. Hence only
firmware releases 2.10 and newer support GeoBASIC debugging with GBStudio.
Please notice, that GBStudio cannot handle the TPS device state “Sleep Mode”
correctly. Please disable the sleep feature of the TPS firmware if you want to avoid
tedious timeout errors in GBStudio.
3.2 TYPICAL DEVELOPMENT CYCLE
3.2.1 Open or Create a GeoBASIC main source file
Use the Open File command to open an existing GeoBASIC main source file or
create a new file with the document type GBS.