LEGRAND 48DCWC-04-2X100-D0NB, Руководство пользователя

Страница: 166 / 211

PRO1 Sentry Switched DC PDU
166 of 211
set access
Sets user access configurations.
Command Syntax
set access button [disabled | enabled]
set access clitimeout <value>
set access localadmin [required | optional]
set access logorder [newest | oldest]
set access method [localonly | ldaponly | ldaplocal | radiusonly | radiuslocal |
tacacsonly | tacacslocal]
set access prompt <prompt string>
set access startupstick [disabled | enabled ]
set access strongpw [optional | required]
set access webloglen <value>
set access webtimeout <value>
Parameters
The set access command uses the following parameters:
button Sets if the Configuration Reset button can reset the system configuration.
clitimeout Set the CLI session idle time before automatic logout [1-1440 minutes].
localadmin Removes the restriction to not allow the last local administrator to be removed when
remote authentication (LDAP, , or RADIUS) is in use.
logorder Sets the default order of the system log when displayed.
method Sets the allowed access methods for users.
prompt Sets the system CLI prompt (0-32 characters).
startupstick Enables/disables the Startup Stick tool for mass PDU configuration.
strongpw Sets if strong passwords are required for local users.
webloglen Sets the number of log entries per page when viewing the log on the Web [10-250
entries].
webtimeout Sets the Web session idle time before automatic logout [1-1440 minutes].
Sub-Parameters
The set access command uses the following sub-parameters:
localonly Local authentication only.
ldaponly Authentication using only the configured LDAP servers.
ldaplocal Authentication using the configured LDAP servers, then locally if no LDAP match is
found.
radiusonly Authentication using only the configured Radius servers.
radiuslocal Authentication using the configured Radius servers, then locally if no Radius match is
found.
tacacsonly Authentication using only the configured TACACS servers.
tacacslocal Authentication using the configured servers, then locally if no
match is found.
Command Access
Admin level only