LEGRAND 48DCWC-04-2X100-D0NB, Руководство пользователя

Страница: 108 / 211

PRO1 Sentry Switched DC PDU
108 of 211
Network > SNMP
The SNMP page provides the network protocol and agent configuration settings for SNMP support.
About Concurrent Sessions:
SNMP does not use sessions; therefore, multiple simultaneous manager operations are supported.
About SNMP Versions:
•
The firmware supports SNMP v1, v2c, and v3.
•
SNMP version 3 supports authentication and encryption on a per user basis. Authentication types are
None and MD5. Encryption types are None and DES. If you use authentication, you must use encryption.
•
Up to eight SNMPv3 users are supported. For each SNMPv3 user you can set access as read only, write
only, read/write, or disabled. All eight users have the same configuration parameters, and you can
configure each user independently.
•
SNMPv2c and SNMPv3 can be enabled or disabled independently. You can have SNMPv2 and/or SNMPv3,
or none.
To Configure the SNMP v2 Agent:
1. Check (or uncheck) the Enable checkbox to enable/disable SNMP v2 Agent support.
2. GET community (RO): Community strings for GET commands.
3. SET community (RW): Community strings for SET commands.
4. Click Apply .
Note: The default for SNMP support is Enabled . When Server Technology products are shipped, the default
SNMP configuration for the GET community string is set to “ public ” and the SET community string is left
blank .