LEGRAND 48DCWC-04-2X100-D0NB, Руководство пользователя

Страница: 44 / 211

PRO1 Sentry Switched DC PDU
44 of 211
Viewing Network Status
You can obtain the IPv6 network status through the firmware Web Interface or Command Line Interface (CLI). For
the CLI, use the
show network command as follows:
Sentry Switched DC PDU Version 8.0t
Switched PDU: show network
Network Configuration
State: Static IPv4 Network: Dual IPv6/IPv4
Link: Up Negotiation: Auto
Speed: 100 Mbps Duplex: Full
Ethernet MAC: 00-0A-9C-61-17-F6
AutoCfg IPv6: FE80::20A:9CFF:FE61:17F6/64
Stateless DHCP6: 2600:6C24::3:20A:9CFF:FE61:17F6/64
IPv4 Address: 66.214.208.96 Subnet Mask: 255.255.255.0
IPv4 Gateway: 66.214.208.1
DNS1: 71.9.127.107
DNS2: 68.190.192.35
Static IP and DNS Settings
IPv6 Address: ::/64
IPv6 Gateway: ::
IPv4 Address: 66.214.208.96 Subnet Mask: 255.255.255.0
IPv4 Gateway: 66.214.208.1
DNS1: 71.9.127.107
DNS2: 68.190.192.35
DHCP Settings
DHCP: disabled
FQDN: enabled [sentry-6117f6]
Boot Delay: disabled
Static Fallback: enabled
ZTP (0-Touch): disabled (not provisioned)
Network Services
FTP Server: enabled Port: 21
FTP Updates: disabled Port: 21
SSH: enabled Port: 22 Auth: Password, Kb-Int
Telnet: enabled Port: 23
HTTP: enabled Port: 80
HTTPS: enabled Port: 443 Installed Cert: Factory
CA Cert: disabled (none)
Server Cert: disabled (none) Passphrase: (none)
SNMPv1/2: enabled Port: 161 TrapPort: 162
SNMPv3: disabled Port: 161 TrapPort: 162
JSON API WebSvc: enabled
SPM Access: enabled
Note: The fields IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway, DNS1, and DNS2 are equivalent to existing PRO1
IPv4 settings except that current network settings and static settings are displayed separately. This allows you to
view both static configuration settings and active network settings that can be obtained using DHCP. DNS
addresses may be in IPv4 or IPv6 (based on RFC4291) format at this time.