LEGRAND 48DCWC-04-2X100-D0NB, Руководство пользователя

Страница: 175 / 211

PRO1 Sentry Switched DC PDU
175 of 211
Parameters
The set port command uses the following parameters:
baud/speed Sets the number of symbols per second of the serial port.
dsrcheck Sets to use DSR before making a serial connection.
rftag Sets RF Code tag (RFTAG) support for selected unlocked port.
Note: If port is locked, any attempts to change this setting will be ignored.
timeout Sets the connection idle timeout for pass-thru connections to this port. 0-60
minutes (default 5 minutes).
Command Access
Admin level only
set sensor
Sets sensor configuration values.
Command Syntax
set sensor adc [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set sensor adc email [disabled | enabled] <name | id | ALL>
set sensor adc hyst <value>
set sensor adc name <name | id> <name>
set sensor adc snmpt [disabled | enabled] <name | id | ALL>
set sensor contact email [disabled | enabled] <name | id | ALL>
set sensor contact name <name | id> <name>
set sensor contact snmpt [disabled | enabled] <name | id | ALL>
set sensor fan [alarmlo | alarmhi | email | hyst | name | snmpt | warnlo | warnhi]
set sensor humid [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set sensor humid email [disabled | enabled] <name | id | ALL>
set sensor humid hyst <value>
set sensor humid name <name | id> <name>
set sensor humid snmpt [disabled | enabled] <name | id | ALL>
set sensor temp [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set sensor temp email [disabled | enabled] <name | id | ALL>
set sensor temp hyst <value>
set sensor temp name <name | id> <name>
set sensor temp snmpt [disabled | enabled] <name | id | ALL>
set sensor water email [disabled | enabled] <name | id | ALL>
set sensor water name <name | id> <name>
set sensor water snmpt [disabled | enabled] <name | id | ALL>
set sensor temp scale [celsius | fahrenheit]