Leader LV 5837, Инструкция по эксплуатации

Страница: 73 / 106

65
11. REMOTE CONTROL (LV 5838 ONLY)
11. REMOTE CONTROL (LV 5838 ONLY)
You can use the remote control connector on the rear panel to load presets, transmit alarm
signals, and perform other operations. Use the supplied 15-pin D-sub connector to control the
LV 5838.
● Pinout
This section contains a diagram of the remote control connector, displayed as it appears on
the rear panel, and a table that describes the connector's pinout.
The pinout varies depending on the Select setting on the ETHER&REMOTE tab in the
system settings.
[Reference] ETHER&REMOTE tab → See section 5.2, “Configuring the Ethernet and Remote Settings (LV
5838
only).”
Figure 11-1 Remote control connector
Table 11-1 Remote control connector pinout
*1 Used with the LV 5838-01 (REMOTE CONTROLLER) and LV 5838-02 (REMOTE CONTROLLER),
which are sold separately. Do not use this for any other purpose.
*2 You must set Trigger on the METER 2 tab in the system settings to Remote.
Connect a LV 5838-02 to control these operations using buttons.
*3 G1 and G2 indicate GROUP1 and GROUP2 on the assign menu.
Connect a LV 5838-01 to control these operations using buttons.
* Do not connect anything to the pins indicated as NOT USE.
Pin
No.
I/O Select
Recall Recall and 5838_02 02
1 O +5 V power supply (*1) +5 V power supply (*1) +5 V power supply (*1)
2 I NOT USE Start/stop loudness measurement (*2) Start/stop loudness measurement (*2)
3 I NOT USE NOT USE NOT USE
4 I NOT USE Clear the loudness measurement (*2) Clear the loudness measurement (*2)
5 I NOT USE NOT USE NOT USE
6 I Recall preset 1 Recall preset 1 G1:STEREO / G2:OFF (*3)
7 I Recall preset 2 Recall preset 2 G1:MONO / G2:OFF (*3)
8 I Recall preset 3 Recall preset 3 G1:5.1 / G2:OFF (*3)
9 I Recall preset 4 Recall preset 4 G1:STEREO / G2:STEREO (*3)
10 I Recall preset 5 Recall preset 5 G1:MONO / G2:MONO (*3)
11 I NOT USE NOT USE G1:STEREO / G2:MONO (*3)
12 I NOT USE NOT USE G1:5.1 / G2:STEREO (*3)
13 I NOT USE NOT USE NOT USE
14 O Alarm output Alarm output Alarm output
15 - Ground Ground Ground
USO
RESTRITO