Leader LV 5837, Инструкция по эксплуатации

Страница: 48 / 106

5. SYSTEM SETTINGS
40
F•2
F•2
5.10 Configuring SDI Error Detection Settings (LV 5838 only)
To configure the SDI error detection settings, use the SDI ERROR tab.
The error counts for the items that are enabled on this tab will be displayed on the SDI section
display. They are also logged on the event log display.
[Reference] See section 10
.2, “SDI Section Display (LV 5838 only)” and section 10.3, “Event Log Display.”
→
BEHAVIOR SETUP
→
PREV TAB (×2)
→
Figure 5-12 SDI ERROR tab
5.11 Configuring Event Log Settings
To configure the event log settings, use the LOG tab.
→
BEHAVIOR SETUP
→
PREV TAB
→
Figure 5-13 LOG tab
● LOGMODE SETTING: OverWrite / Stop
The event log can hold 1000 entries. Select whether to overwrite the log or stop logging
when the 1001st error occurs.
F•2
F•2
SYSTEM
SYSTEM
USO
RESTRITO