Leader LV 5837, Инструкция по эксплуатации

Страница: 46 / 106

5. SYSTEM SETTINGS
38
5.9 Configuring Audio Error Detection Settings
To configure the audio error detection settings, use the AUDIO ERROR tab.
The error counts for the items that are enabled on this tab will be displayed on the audio
section display. They are also logged on the event log display.
[Reference] See section 10
.1, “Audio Section Display” and section 10.2, “Event Log Display.”
SYSTEM
→
BEHAVIOR SETUP
→
PREV TAB (×3)
→
Figure 5-11 AUDIO ERROR tab
● AUDIO ERROR ACQUISITION SETTING
Select the channels for detecting errors.
● LevelOver: ON / OFF
Level: -40 - 0 (dBFS)
Turn the level-over error detection on or off.
If you select ON, enter the level. An error is detected when a signal exceeding the specified
level is received.
● Clip: ON / OFF
Duration: 1 - 10 - 100 (sample)
Turn the clip error detection on or off.
If you select ON, enter the duration. An error is detected when a maximum signal is
received for longer than the specified duration.
● Mute: ON / OFF
Duration: 1 - 10 - 100 (sample)
Level: -99 - -60 (dBFS)
Turn the mute error detection on or off.
If you select ON, enter the duration and level. An error is detected when a value below the
specified level is received for longer than the specified duration.
F•2 F•2
USO
RESTRITO