Leader LV 5837, Инструкция по эксплуатации

Страница: 69 / 106

10. STATUS DISPLAY
61
● Error Display
The errors that may appear on the event log display are listed below.
Only the items whose detection has been enabled on the AUDIO ERROR tab and SDI
ERROR tab (LV 5838 only) in the system settings are displayed.
[Reference] AUDIO ERROR tab → See 5.9, “Configuring Audio Error Detection Settings.”
SDI ERROR tab
→ See section 5.10, “Configuring SDI Error Detection Settings (LV 5838
only).”
Table 10-1 Error display
Error Name Description
AUDIO ERROR tab OVER LevelOver
CLIP Clip Error
MUTE Mute Error
SIL Silent Error
PAR Parity Error
VAL Validity Error
CRC CRC Error
SDI ERROR tab A_BCH BCH Error
A_PRTY Parity Error
A_DBN DBN Error
A_INH Inhibit Error
A_SMP Sample Number Error
Following the error name on the AUDIO ERROR tab, the channels on which the error
occurred are displayed using a hexadecimal number (for example:
“MUTE:000C”).
Channels are displayed in order from channel 16. For example, 000C
(0000000000001100) indicates that errors have occurred in channels 3 and 4.
● Note
The event log records events are detected for both the external audio signals and
embedded audio signals. However, for embedded audio signals, only the currently
selected channel is recorded.
If the same error occurs consecutively or if multiple errors occur at the same time, they
are treated as a single error.
If multiple errors occur at the same time, you may not be able to view all the events on
the screen. If this occurs, you can view all the errors by saving them to a USB memory
device.
USO
RESTRITO