Maintenance and service
Cleaning the operating surface
zirkon User Manual
V 1.2
47/ 58
Cleaning the operating surface
For cleaning the control panel of the console please use
technical cleaning cloths with the following features:
•
Antistatic
•
Fluff-free
•
Without emery pieces
Warning!
Liquids must not enter the electronic circuitry!
Do not clean the mixing console with sharp instruments!
We use the cleaning cloths “Technical Cleaner” by Coolike
(
http://www.coolike.com
).
Replacing the lithium battery
The master board in the system unit is fitted with a lithium
battery. This battery guarantees that your data remain
saved also when the system is switched off. As a
precaution to prevent malfunctioning we recommend to
replace the battery after about eight years. For this
replacement, please send the respective central board to
your service point.
Defective modules
Warning!
The devices contain no user-serviceable or configurable
parts!
Therefore:
•
Do not open the devices. Maintenance works inside
the devices are not necessary.
In case of an evident hardware defect please send the
defective device with a detailed description of the fault
(see enclosures) to your service point.
Modules sent to our service-points that are not defective
cause much work and high costs. Please check yourself
carefully beforehand whether the failure is caused rather
by an erroneous configuration, operation or connection.
Thank you!
Important
Note
