Operating concept
Audiocontrol
zirkon User Manual
V 1.2
27/ 58
The individual parameters are operated as follows:
3.
Rotate the rotary control to change the
amplification.
4.
Push and turn the rotary control to change the
frequency.
This is signalled by an inverse display of the frequency
parameter.
5.
Press the access buttons (MID 1-3) to switch the
function of the rotary control over to the settings of
the Q factor.
Here, the parameter is also displayed inverse. Pushing the
LCD button again re-establishes the basic status.
6.
With LOW and HIGH you alternate between the filter
modes!
LOW: HP – SHLV /HIGH: LP – SHLV
As the modes LP and HP are pure filter functions, only
frequencies can be set.
In the equalizer section the source format is irrelevant as
for stereo sources the parameters are automatically
coupled.
Note
