Control elements, what is where?
Central module
zirkon User Manual
V 1.2
17/ 58
Central module
This control panel module can be integrated in every
zirkon system only once. It includes buttons for operating
monitoring, talkback equalizer and dynamics. Furthermore
it is possible to programme buttons for the summing bus
assignment. Established configurations can be managed
with the built-in chipcard reader/writer.
(1)
These 24 freely programmable buttons are ordered
in six groups with four buttons each to establish
functional groups. This allows to separate e. g.
monitoring selection and talkback optically and with
regard to position.
(2)
The bottom section is equipped with two freely
programmable volume controls. The two rotary
controls can be programmed for setting the
monitoring level as well as for functions like
monitoring, headset volume, loudspeaker volume etc.
(3)
The top section includes twelf self-labelling (access)
buttons. In the default status these keys are assigned
with the pre-configured functions. They can be freely
programmed and allow e. g. the assignment of
channels to summing buses or special operations
(remote function with foldback).
•
With selecting a channel via the access button of a
channel module the buttons of the central module
are labelled according to the source. (See chapter
“Operating concept - audio control“)
(4)
With the rotary controls positioned vertically above
the access buttons you can set parameters offered
according to the source.
•
The settings are explained in detail in the chapter
“Operating concept - audio control”).
(5)
A chipcard reader/writer is integrated in the top
section of the central module.
•
With this reader/writer you can store your own
settings and load them next time.
For more about using the chipcard please consult the
respective chapter.