Operating concept
Summing bus assignment
22/ 58
V 1.2
zirkon User Manual
Summing bus assignment
Depending on how your zirkon system is programmed you
can perform a summing bus assignment.
1.
Press the summing definition button (e. g. AUX
DEF/ MAIN DEF)!
You are now in the mode for the summing bus assignment.
2.
Press the channel-strip LCD button of the source
you want to select.
The source can be now configured for the summing bus.
3.
Use the rotary control in the channel strip for setting
the amplification (AUX SEND LEVEL)
The signal is now ready for assignment. The following
signalling apply:
Green:
not assigned (OFF)
Red:
assignment pre fader (PRE FADER) –
The input signal is directly added to the respective
sum after a possible processing (EQ/DYN/LIM) but
without being affected by the fader position.
Yellow:
assignment after fader (POST FADER).
