Control elements, what is where?
Channel module
zirkon User Manual
V 1.2
15/ 58
Control elements, what is where?
All control elements are positioned on the central module
or the channel modules. Thus all functions are provided on
the clearly designed control panel.
Channel module
All channel strips in the channel module are designed
identically. This allows to assign any kind of signals
(microphone/line/transmission line) to any channel strip.
(1)
Three LEDs at the top indicate the signal status,
thus providing a quick overview.
•
You identify an overload when the top diode blinks or
when it is on. In this case please adjust the input
signal gain to not jeopardise the signal quality.
•
The middle diode shows the activity of the integrated
active limiter.
•
The bottom lamp indicates whether an input signal is
supplied. It lights up in the signal clock and has a
responding threshold of -20dB.
(2)
The operation of the four freely programmable
buttons is defined by the selected operating modes.
If you have questions about the configuration please
ask your network administrator!
(3)
The middle section of the channel strip carries the
faders. These are motor faders fitted with tracks of
conductive plastic. The faders are maintainance-free.
The scale ranges from -
∞
to +9.
(4)
The respective channel is indicated by the self-
labelling button (access button).
•
The button label shows the source name (input
signal) and the time. This is a big help in on-air
scheduling, particularly for devices without a time
display (recorders, microphones, record players,
etc.).
