Operating concept
Audiocontrol
zirkon User Manual
V 1.2
23/ 58
Audiocontrol
After assigning a source to a channel strip you can now set
the audio parameters.
1.
Press the LCD button of the channel strip!
The access buttons in the central module change their labels.
The following parameters for signal processing are available:
•
Pre-amplification (GAIN)
•
Equalizer (EQ)
•
Compressor (COMP)
•
Limiter (LIM)
2.
Press the LCD labeled with the parameter you want
to adjust!
The access button shows now the assigned parameters with
the currently set value.
3.
Turn the rotary control positioned above the LCD
button!
The settings of the parameter change.
Depending on which source you selected only certain
parameters are available. For example, you can only
adjust the analogue input amplification for analogue
microphone channels.
The following signalling rule applies for the audio control
if not declared otherwise in the following text:
GREEN:
ready for operation
RED:
active
Note
