IT | Abbattitori di temperatura | Manuale d’uso e manutenzione
2
CLASSE CLIMATICA :
5 (Temperatura am40°C; Umidità relativa 40%).
CARICO MASSIMO PER RIPIANO:
6 kg uniformemente distribuiti per
ogni ripiano grigliato.
Tutte le operazioni di manutenzione ordinaria e straordinaria, sia del mobile
refrigerato che del monoblocco refrigerante o dell’unità condensatrice
incorporata, devono essere eseguite con unità ferma, togliendo la tensione
elettrica. Si raccomanda che tale pulizia venga effettuata da personale specializzato.
La spina elettrica del mobile refrigerato deve sempre essere collegata ad una presa
fissa. È vietato collegare la spina elettrica del mobile ad una prolunga e/o riduttore.
Non danneggiare e piegare le alette dell'evaporatore ed i tubi del fluido refrigerante.
La presente attrezzatura professionale può essere utilizzata e pulita solo da soggetti
maggiorenni (> 18 anni in Europa o altri limiti definiti dal compendio normativo
locale) aventi condizioni psico-fisiche normali e adeguatamente addestrati e
formati in materia di tutela della salute e sicurezza nei luoghi di lavoro.
Tutte le operazioni riguardanti la manutenzione e la sostituzione delle parti,
devono
essere effettuate da personale tecnico qualificato.
L’installazione dell’apparecchio e dell’unità refrigerante deve essere
effettuata solamente da tecnici del costruttore oppure da persone esperte.
Se il cavo di alimentazione è danneggiato, esso deve essere sostituito dal
costruttore o dal suo servizio assistenza tecnica o comunque da una
persona con qualifica similare, in modo da prevenire ogni rischio.
Quando si sostituiscono delle parti e qualora si preveda la rimozione della spina, sia
chiaramente indicato che la rimozione della spina deve essere tale per cui un operatore
possa verificare da qualsiasi punto cui abbia accesso che la spina resti staccata.
Prima di procedere ad effettuare operazioni di manutenzione, di controllo,
pulizia, è necessario staccare l’alimentazione elettrica.
Led compressore
Acceso fisso indica com-
pressore in funzione,
lampeggiante ritardo o
protezione. In selezione
programma indica abbatti-
mento bassa temperatura.
Led ventole
Acceso fisso ventole evaporatore
accese, spento ventole spente.
Led defrost.
Acceso in sbrinamento, lampeg-
giante sbrinamento manuale.
Led gradi centigradi
Acceso quando lo strumen-
to visualizza temperature
Led gradi Farenight
Come sopra in gradi
Farenight
Led allarme
Acceso fisso allarme attivo,
lampegiante allarme tacitato
Led salvadanaio
Acceso lampeggiante
abbattimento in corso
Led aux
Acceso conservazione in corso
Led salvadanaio
Acceso lampeggiante abbat-
timento in corso
UP
DOWN STAND-BY
ESC
SET
ENTER
MESSA A TERRA
ATTENZIONE
ITALIANO
- RAEE - Gestione rifiuti apparecchiature elettriche ed elettroniche -
Il simbolo del bidone barrato posto sul prodotto o sulla documentazione del manuale d’uso, indica che
il prodotto è stato immesso nel mercato dopo la data del 13 agosto 2005. Al termine del ciclo di vita utile, il prodotto, deve essere raccolto, smaltito, trasportato in modo separato rispetto agli altri rifiuti urbani
seguendo le normative vigenti in ogni paese. In questo modo potrà essere recuperato contribuendo ad evitare possibili effetti negativi sull’ambiente e sulla salute, favorendo il reimpiego e/o il riciclo dei materiali
di cui è composta l’apparecchiatura. Lo smaltimento abusivo del prodotto da parte dell’utente comporta l’applicazione di sanzioni amministratiuve previste dalla norma vigente. La Direttiva comunitaria RAEE N°
2002/96/CE, (in Italia recepita con il Dgls del 15.05.2005 N°151); Direttiva comunitaria N°2003/108/CE riguardante il trattamento dei rifiuiti delle apparecchiature elettriche ed elettroniche.
Benvenuto
Vi ringraziamo per aver scelto un nostro prodotto.
Siete invitati a leggere attentamente il presente manuale per assicurarvi l'utilizzo
ottimale della Vostra attrezzatura.
RAEE
WEEE
ATTENZIONE
LEGGERE ISTRUZIONI
Istruzioni originali