Abbattitori di temperatura | Manuale d’uso e manutenzione | IT
19
Stop
Visualizzazione
Il display visualizza il tempo (in minuti) se è selezionato un ciclo a tempo oppure la temperatura della sonda al
cuore in °C per un ciclo a sonda.
Il simbolo “
” acceso indica la selezione di un ciclo negativo.
Tasti
Il tasto SET
, permette di selezionare il ciclo di abbattimento.
La pressione del tasto Start/Stop
per 4 sec. pone il controllore in Stand-by.
La pressione semplice del tasto Start/Stop avvia o interrompe il ciclo selezionato.
La pressione di Up
, Down
permette di modificare il tempo o la temperatura del ciclo selezionato.
Se è attivo il buzzer la prima pressione di Up
tacita il buzzer.
Start
Visualizzazione in abbattimento
Il display visualizza il tempo mancante (in minuti) se è selezionato un ciclo a tempo oppure la temperatura della
sonda al cuore in °C per un ciclo a sonda.
Sul lato destro del display, lampeggia il simbolo
che indica che il ciclo di abbattimento è in corso.
Ogni 2 minuti sul display scorre la scritta “freezzer” per abbattimento positivo e “chiller” per quello negativo e
lampeggia il tempo trascorso.
Se la porta è aperta (contatto non è chiuso) a display compare la scritta “PAP “ ad indicare che è aperta.
Tasti
Con la pressione del tasto Up
si visualizza la temperatura camera.
Con la pressione del tasto Down
si visualizza il tempo trascorso da inizio abbattimento per 5 secondi.
Se è attivo il buzzer, la prima pressione di Up
permette di tacitare il buzzer.
Una pressione semplice di Start/Stop
termina il ciclo di abbattimento/conservazione.
ATTENZIONE
Se all’avvio di un abbattimento a sonda, dopo 5 minuti, si presentasse l’errore “PnS”, riposizionare la
sonda in modo più idoneo, altrimenti l’abbattimento continuerà a tempo.
Al termine della fase di abbattimento positivo si ha il passaggio automatico in conservazione ad una
temperatura da 0 a +3°C e lampeggia la scritta “AUX”.
Al termine della fase di abbattimento negativo si ha il passaggio automatico in conservazione ad una
temperatura da -22 a -25°C e lampeggia la scritta “AUX”.
Per rispettare i tempi di abbattimento previsti per legge, mentre è in corso un ciclo di abbattimento, è
vivamente sconsigliato aprire la porta dell’Abbattitore.
6.3 ALLARMI
Gli allarmi presenti sono quelli relativi alle sonde. Sono mostrati solo quando è richiesta la
visualizzazione della sonda relativa.
“Pr “
Errore generico o interno delle sonde
“Pr1“
Errore sonda camera
“Pr2“
Errore sonda al cuore
“PnS”
Sonda al cuore non inserita correttamente
Se è in corso un abbattimento e si verifica un errore sonda al cuore (Pr2), il ciclo passa a tempo pur rimanendo
la visualizzazione dell’errore.