LAUNCH
X-431 Torque 5 User Manual
84
The oscilloscope applies edge trigger, which is the most commonly used and
effective trigger method. A clear majority of applications apply this trigger
method to trigger waveform. An edge trigger determines whether the
oscilloscope finds the trigger point on the rising/falling/dual edge of a signal.
When the tested signal voltage direction is consistent with preset direction, and
the value reaches trigger voltage, the oscilloscope will be triggered and capture
waveform.
Menu
Comments/Settings
Source
Select channel source of triggered signal.
Trigger
Level: The electrical level that signals shall exceed
when capturing waveform.
Rise: Trigger on rising edge.
Drop: Trigger on falling edge.
Close: Turning off trigger mode.
In this mode, the user can set the trigger level by directly dragging the Level
scroll bar or the icon
on the right side of the waveform display area.
3. Auto-Set
The oscilloscope has an auto-set feature that sets up the oscilloscope
automatically to display the input signal in a best fit.
Tap
Auto
, the oscilloscope may change the current settings to display the signal.
It automatically adjusts the vertical and horizontal scaling, as well as the trigger
coupling and position.
4. Menu Operations
1. Measure
