LAUNCH TECH X-431 Torque 5, Руководство пользователя

Страница: 87 / 111

LAUNCH X-431 Torque 5 User Manual
78
“Connected” when
successfully connected.
19
/ Cursor position
Turn on/off the horizontal/vertical cursor
measurement function. When set to ON,
two horizontal/vertical reference lines
named with Y1 & Y2/X1 & X2 will be
displayed on the waveform display area.
The user can use / or / to
fine tune the line or drag the line directly
to move it.
Tap this button once to
start the cursor
calculation function. Tap
it again to disable it.
20
/ or / Fine-tuning button
Fine tunes the vertical/horizontal
reference line.
When the horizontal
cursor is ON, the fine
tuning buttons display
and . If the vertical
cursor is ON, the fine
tuning buttons will
change into and
.
21
Measurement value area
Go to Menu -> Measure
to expand it.
22
Level scale of the Channel 1
23
Channel 2 marker
Shows the reference points of the
displayed waveforms. If there is no
marker, the channel is not displayed.
If the marker is displayed
as
, it indicates the
channel is not the
current channel. Tap the
marker
, it will change
into indicating the
channel is the current
channel.