LAUNCH
X-431 Torque 5 User Manual
11
8
Multilingual Quick
Start Guide
1
Note: The following accessory items are used only when the DBSCar IX device
works as a 2-channel oscilloscope or a multimeter.
9
BNC to 4mm test
leads
Dedicated cable used to connect
sensor and the DBSCar IX device to
test all types of vehicle signals.
1
10
Multimeter test pen
(red + black)
Connect to COM and V/Ω terminal of
the sensor module when using
multimeter.
Red x 2 +
black x 2
11
Crocodile clips (red
+ black)
Designed to connect the bare
terminals or leads.
Red x 2 +
black x 2
12
Back probe pins
suite
Used to connect sensor and BNC to
4mm test leads, and can easily pierce
the insulation of wires to allow for
automotive electrical measurements
without causing damage to the wires.
Additionally, they can be used as
pin-tip probes while working with small
circuit boards.
1
