LAUNCH
X-431 Torque 5 User Manual
93
2. Select
Resistance
, tap
Not connected
to search for DBSCar IX devices.
When it is successfully connected, the diagnostic tool will display connection
status.
3. Insert the black and red test pen into
COM
and
V/Ω
terminal of the DBSCar IX
device respectively.
4. Attach the black and red test pen to metal part of resistance ends. Keep test
pen firmly attached to resistance.
5. Numerical value will be displayed directly on the diagnostic tool.
Note: You can touch resistance with hands during measurement, but do not touch
both ends of resistance simultaneously, as it will affect measurement accuracy.
D. Diode Measurement
This multimeter can measure light-emitting diode and rectifier diode. The way
test pen is placed is the same with voltage measurement.
1. Tap
Toolbox -> Multimeter
on the diagnostic tool to enter.
2. Select
Diode
, tap
Not connected
to search for DBSCar IX devices. When it
is successfully connected, the diagnostic tool will display connection status.
