LAUNCH
X-431 Torque 5 User Manual
92
2. Select
DC current/AC current
and corresponding range. Tap
Not
connected
to search for DBSCar IX devices. When it is successfully
connected, the diagnostic tool will display connection status.
3. Insert black test pen into
COM
terminal of the DBSCar IX device. If measured
current is above 400mA, insert red test pen into
A
terminal of the DBSCar IX
device. If measured current is below 400mA, insert red test pen into
mAμA
terminal of the DBSCar IX device.
4. Connect black and red test pen to tested point. Keep test pen attached to it
firmly.
5. Tap
Start
, numerical value will be displayed directly on diagnostic tool.
C. Resistance Measurement
1. Tap
Toolbox -> Multimeter
on the diagnostic tool to enter.
