LAUNCH
X-431 Torque 5 User Manual
91
2. Select
DC voltage
/
AC voltage
and corresponding range. Tap
Not
connected
to search for DBSCar IX devices. When it is successfully
connected, the diagnostic tool will display connection status.
3. Insert the black and red test pen into COM and V/Ω terminal of the DBSCar
IX device respectively.
4. Attach black and red test pen tip to tested point. Keep test pen attached to it
firmly.
Option descriptions:
Menu
Comments/Settings
Numerical
waveform mode
Displays the measurement result in both numerical
and waveform form.
Numerical mode
Displays the measurement result in numerical form.
Waveform mode
Displays the measurement result in waveform form.
Open waveform
Open saved waveform file.
Save waveform
Save measurement result as a waveform file.
5. Tap
Start
, a numerical value will be displayed directly on the diagnostic tool.
Warning: The tip of the test pen is metal, do not touch it with hands during
measurement, otherwise it might cause electricity shock and affect measurement results.
B. Current Measurement
DC current and AC current measurement apply the same connection method.
1. Tap
Toolbox -> Multimeter
on the diagnostic tool to enter the following
screen.
