LAUNCH
X-431 Torque 5 User Manual
74
EEPROM, MCU, and EEPROM/FLASH of vehicle engine and gearbox ECU. It
needs to work with the specific immobilizer programmer (sold separately).
For more details, please refer to the User Manual included with the module.
11.6 Mall
This module allows you to subscribe some extra software or service functions
that are not included in the diagnostic tool online.
11.7 X-431 Scopebox
This module assists the auto repair technician with the ability to quickly identify
faults on automotive electronic equipment and wiring. The oscilloscope sweep
speed is far greater than the signal frequency of such vehicles, usually 5-10
times of the measured signal and quickly acquire the circuit signal while slowly
displaying the waveform for observation and analysis. In this case, the DBSCar
IX device works as a 2-channel oscilloscope.
11.7.1 Initial Use
1. Getting Started
Tap the app icon and the following screen will appear:
Note: If no proper connection is made, no waveforms will be displayed on the
screen and most functions become disabled.
