8
LatticeECP3 Serial Protocol Board – Revision E
User’s Guide
Figure 6. Main Downloading Window
5.
Double-click the device to open the device information dialog. In the device information dialog, click the
Browse
button located under
Data File
. Locate the desired bitstream file (.bit). Click
OK
to both dialog boxes.
6.
Add the data file from the
Browse
dialog and select
OK
when complete.
7.
To program only the LatticeECP3-95, place the LCMXO1200C and the ispPAC-POWR1220AT8 devices into
BYPASS and the LFE3-95 into Erase, Program, Verify mode, as shown below.
Figure 7.
Device Information Window