13
LatticeECP3 Serial Protocol Board – Revision E
User’s Guide
Figure 13. Sample SPI Serial Flash Device Dialog Box
9.
Click
OK
in the SPI Flash Device Dialog box. Then click
OK
in Select Device dialog box. You will then return to
the main configuration screen. If you do not desire to load the LCMXO1200C and the ispPOWR1220 device,
these devices should be placed in Flash Bypass mode by double-clicking the
Operation
column and selecting
the Bypass operation shown below.
Figure 14. Flash Bypass for LCMXO1200C Device
10. From the main programming window, Select
Go
for the top toolbar. This will begin the SPI Serial Flash pro-
gramming.