- 98 -
Spirit GE User Manual
•
Always turn off and unplug the Spirit GE before cleaning!
8.1 Suggested Cleaning and Maintenance Supplies
Cleaning / Maintenance Tool
Special notes
Soap Solution or All-Purpose Cleaner
Paper Towels
Cotton Cloth
Denatured Alcohol
DO NOT use alcohol on any painted surface,
plastic, or the laser system!
Acetone
ONLY to be used on the working table
Vacuum Cleaner with a Flexible Nozzle
Only to be used in and around the worktable
and motion system
Light Grade Machine Oil
Cotton Swabs
Supplied
Lens Cleaner
Supplied
Lint Free Lens Tissue
Supplied
#2 Phillips Screwdriver
Allen Wrench .050”
8.2 Maintaining the Worktable and Motion System
8.2.1 Accessing the Worktable and Motion System
It will be important to gain full access to the worktable and motion system to properly clean and
maintain these areas. To do so, you will need to open the LaserPro Spirit GE’s SmartLID. You
can do this via the following steps:
Opening the SmartLID:
1) Using the two operational handles, lift up to open the SmartLID from the rear side of the
LaserPro Spirit GE. Ensure you lift up the lid to the maximum (indicated by a small click)
to engage the latch (as shown in the picture below).
