- 92 -
Spirit GE User Manual
1) To install the SmartMEMORY module, you will need to first access the system’s motherboard. To
do so, use a screwdriver to remove the two screws securing the panel on the right hand side of
the SPIRIT.
2) Open the panel and to expose the Spirit GE’s motherboard.
3) Simply connect the SmartMEMORY module to the connector on the SpiritGE’s motherboard
(indicated in the pictures below).
OPERATION:
With the SmartMEMORY module installed, you will be able to SAVE and LOAD to the SmartMEMORY:
NOTE
In order to properly use the SmartMEMORY module with the Spirit GE, ensure the Spirit
GE’s firmware is version 1.02 or later. Also keep in mind, the capacity of the
SmartMEMORY module is 4MB, please do not save files that exceed this limit.
SAVE files to the SmartMEMORY module:
1) Navigate to the Write Flash Memory function. From the Spirit GE Control Panel, press the F4
(Function)
Æ
MACHINE SETTING
Æ
FLASH MEMORY
Æ
WRITE FLASH MEMORY.
2) By selecting the Write Flash Memory function, the tasks stored on the Spirit GE will be
transferred over to the SmartMEMORY module.
LOAD files from the SmartMEMORY module:
1) Navigate to the Read Flash Memory function. From the SPIRIT GE Control Panel, press the F4
(Function)
Æ
MACHINE SETTING
Æ
FLASH MEMORY
Æ
READ FLASH MEMORY.
2)
By selecting the Read Flash Memory function, the tasks stored on the SmartMEMORY module
will be transferred over to the SPIRIT.
SmartMEMORY
Module
Spirit GE’s Motherboard
