LaserPro Spirit GE, Руководство пользователя

Страница: 51 / 109

Spirit User Manual
- 50 -
Set Fine Mode Page
The Set Fine Mode Page allows you to choose whether to engrave with more precision (quality)
at the expense of speed, or vice-versa. With Fine Mode set to <YES> will provide higher quality
output, but slower processing speeds. With Fine Mode set to <NO> will provide faster processing
speeds at lower quality output.
ƒ Fine Mode: YES / NO
TIP
The Fine Mode setting modifies the acceleration and deceleration of the X / Y rails,
therefore enabling or disabling Fine Mode will be most evident when engraving small,
fine, intricate designs (such as engraving small circle patterns). We recommend you set
Fine Mode to YES when engraving such designs. When cutting, the Fine Mode setting
should always be set to NO, as this does not benefit vector cutting operations, but rather
slows the processing speeds down.
Set Fine Mode Page
Relevant Buttons Function
F1 (Back) Back to previous page
F4 (Save) Save your current settings
Y
/
Z
Directional Cycle Fine Mode between YES / NO
Start / Stop Back to Main Work Page
Auto Focus Initiate the auto focus function
▲ / ▼ Manual Focus
Buttons
Manually adjust the height of the work table (Z-
axis)
Main Work Page
Press F4
☼ Navigating to this page:
Functions Page
Select < Machine Setting >
from the menu
Machine Setting Page
Select < Set Fine Mode >
from the menu
Set Fine Mode Page